The EVERHOT 120 Series offers unsurpassed flexibility in the market. The 120 offers four ovens and four hotplates, each being independently controllable for maximum versatility. So you can have cakes in one oven, the roast vegetables in another, a joint in the third, plates warming in the fourth â€“ all at different temperatures. On the hotplates, a sauce simmering gently, peas boiling on another and loads more hotplate space to spare. As with the 60 the control boxes can be conveniently situated in adjacent kitchen units (or on the worktop).
For further information on any of our products, or to place an order, please contact us.
Telephone: 01773 820940
Fax: 01773 599309
E-mail: firstname.lastname@example.org ( or click the link below )
The EVERHOT 120 Series offers unsurpassed flexibility in the market. The 120 offers four ovens and four hotplates, each being independently controllable for maximum versatility. So you can have cakes in one oven, the roast vegetables in another, a joint in the third, plates warming in the fourth - all at different temperatures. On the hotplates, a sauce simmering gently, peas boiling on another and loads more hotplate space to spare. As with the 60 the control boxes can be conveniently situated in adjacent kitchen units (or on the worktop).
If you are in the market for a range with four full ovens then you will recognise that EVERHOT 120 (1200mm wide) is somewhat unique.
Whilst other manufacturers fill the space behind one or two doors with controls and other equipment, the EVERHOT can provide the four ovens you are looking for behind four beautiful cast iron doors.
It also offers an unrivalled amount of hotplate space.
Once again this product is highly flexible; if you do not need all four ovens working on a day-to-day basis, simply turn off the ones you don't need and turn them on again when required.
The EVERHOT is a heat storage range cooker that will provide gentle heat into your kitchen.
Because it runs on electricity, the EVERHOT needs no flue. Again, this makes installation easy, and also reduces energy consumption.
With its unique, energy saving design, the EVERHOT has extremely low electricity requirements; indeed many owners have praised its 'miserly consumption'.
Each oven and heating surface can be independently adjusted to the temperature you require. If a particular cooking area is not needed for long periods, you can switch it off or turn it down without affecting the other areas. And on hot summer days, you don't have to roast in the kitchen.
You'll have 2 full-width radiant grills, which an also be used to rapidly boost oven temperature. Other comparable ranges just don't provide grills.
With a little care and affection, the EVERHOT will perform trouble-free year after year, with no annual servicing requirement (unlike other ranges).
Each and every EVERHOT is manufactured in Gloucestershire, using 95% UK components. Using sustainable water energy from the 13th Century water mill was the catalyst for the initial invention of the EVERHOT cooker. Today, the state of the art turbine produces up to 25KW of sustainable energy. Additionally, due to the EVERHOT being so energy efficient in it's running consumption it maintains its status as being a more environmentally friendly choice of cooker. You should consider your EVERHOT to be a lifetime purchase and indeed it will give many decades of use, but if you or a succeeding owner decide that you want to dispose of it we will remove it from your property free of charge and recycle it.
EVERHOT COOKERS TEMPERATURE GUIDE
TOP OVEN TEMP. RANGE 0-250°C
HEAT UP TIME FROM COLD APPROX 90 MINUTES
NORMALLY SET AT 180-220°C
To check the actual oven temp. press the up and down arrow buttons
(when the only the top oven is on and set at 200°c it will heat the hotplate to 85-90°c and the bottom oven reaches approx.30°c)
GRILL TIMED FROM 0-30 MINUTES ALSO CAN BE USED TO PREHEAT OVEN (very powerful, so use lower shelve positions)
BOTTOM OVEN TEMP. RANGE 0-200°C HEAT UP TIME APPROX 90 MINUTES FROM COLD (if the top oven is up to temperature, this time will be reduced significantly) NORMALLY SET AT 80-120°C
MAIN HOTPLATE TEMP. RANGE 0-400°C
HEAT UP TIME FROM COLD TO MAX TEMP 40 MINUTES (if the top oven is up to temperature, this time will be reduced significantly )
NORMALLY SET BETWEEN 260°C- 320°C
SIMMER PLATE 0-400°C
NORMALLY SET AT 200°C (will also pick heat up from main hotplate and may not always need switching on)
WARMING OVEN (100CM MODEL ONLY)
ONLY RECEIVES HEAT WHEN BOTTOM OVEN IS USED, NOT SUITABLE FOR COOKING FOOD, BEST USED FOR KEEPING PLATES WARM.
FOR THE NEW 100 PLUS MODEL THE WARMING OVEN HAS BEEN MOVED TO A HIGHER POSITION SO IT NOW WORKS WHEN THE MAIN OVEN IS USED (approx temperature 60°c.)
AUTO MODE WILL SWITCH COOKER INTO SLUMBER SETTING
BETWEEN 9PM TO 5AM DAILY
PROGRAMMABLE SETTING IS A 7 DAY TIMER GIVING YOU
TWO SLUMBER PERIODS PER DAY.
For guidance only, please refer to manufacturers instructions before using
Everhot 120 - Pre-installation guide
The installation of the EVERHOT is a very simple operation that is normally carried out by ourselves or one of our dealers, however it is worth noting the points below and if you follow these simple guidelines it will ensure that everything goes well on delivery day.NOTE: The preparation of the site, in readiness for the installation of the appliance, is the responsibility of the site owner, not of the manufacturer of the appliance.-The floor must be level and capable of supporting the weight of the cooker (approximate weight 500kg).
-The cooker measurements are 600mm deep and 900mm high to the working surface with a width of 1200mm. The EVH 120 should be installed with a minimum of 30mm clearance from the back wall to allow for the electric cable entry. On no account should the cooker be pushed hard against the back wall as this may damage the electric cable. A minimum gap of 5mm per side is required to allow installation and removal of the cooker - please contact us in advance of installation if this is not possible. Where the end grain of a wooden worktop is adjacent to the cooker, we recommend that this is increased to 10mm to minimise the chance of the worktop splitting.
-Clearance must be allowed for the raising of the cooker lid(s) into the upright position (minimum height of 1530mm from ground level). Please see side view diagrams for further clarification. A 5mm gap on the outside edges of the lids should be allowed when in the raised position (each lid is 590mm wide to allow for overhead cupboards).
-The appliance must be used on 220-240V AC only and should be plugged into two standard 13 amp sockets. The 13 amp sockets should be accessible and positioned adjacent to the cooker, so as not to impede the opening of the top lid, and ensuring the plug is not exposed to steam or excessive moisture. If the sockets cannot be positioned immediately adjacent to the cooker, please see diagrams attached for exact lengths of cables (unfortunately it is not possible to extend these cable lengths). If the power supply cord is damaged, it must be replaced by the manufacturer or their representative, as special purpose tools are required. An Everhot cooker should NOT be hard wired - please install using the supplied 13amp plugs.
-The Everhot 120 comes with two separate control boxes connected to the cooker via 20mm flexible conduits to allow for a choice of positioning. They may be sited within an adjacent cupboard or on a worktop as required (the control boxes must not be covered by combustible material or be positioned where contamination with liquids is likely). The control boxes are not suitable for wall mounting and should remain freestanding in order to facilitate future maintenance. The conduits and power cables should also be easily accessible. Once the positions have been decided the control boxes should not be moved in day to day use. Standard conduit lengths supplied are 2 metres (unfortunately it is not possible to extend these cable lengths). The control boxes can both be positioned to one side of the cooker or one each side. Where the control box leads are passing through a cupboard this can be done by our installers on delivery. If they need to pass through walls or thicker materials two 50mm diameter holes should be prepared in advance of the delivery.
For further details and to purchase this item, please get in touch or visit our showroom.Make an Enquiry